Compari.ro - ghid autentic de shopping

Cele mai cautate

Articole recomandate care v-ar putea plăcea

ADAPTOR SPACER fixare HDD/ SSD 2.5 in bay de 3.5 , 1 x 2.5 , SPR-25352

Promo

ADAPTOR SPACER fixare HDD/ SSD 2.5 i...

27.00 lei

UBIQUITI U-POE++-EU POE ADAPTER 60W 48V 1.25A

Promo

UBIQUITI U-POE++-EU POE ADAPTER 60W 4...

40.84 lei

MIKROTIK S-31DLC20D SFP Module 1.25Gb/s 1310nm 2x LC 20km Single mode

Promo

MIKROTIK S-31DLC20D SFP Module 1.25Gb...

108.19 lei

Ghilotina (cleaver) pentru taiere fibra optica 9 - 16mm - Emtex

Promo

Ghilotina (cleaver) pentru taiere fib...

141.22 lei

Ubiquiti UACC-AOC-SFP10-10M, Cablu optic SFP+, Lungime: 10m, Culoare: Aqua.

Promo

Ubiquiti UACC-AOC-SFP10-10M, Cablu op...

241.56 lei

Bobina de linie 6SL3000-0CE32-3AA0

Promo

Bobina de linie 6SL3000-0CE32-3AA0

2,864.65 lei

Soldering gun for tin, fludor, power 75W
- it is powered at 230V AC
- the set also contains 5 spare tips
Packaging: blister 1 pc

Destination:

The transformer soldering gun is designed for soldering small components. It is especially recommended for soldering connections in electrotechnics, where the soldered components will not be damaged by the resistance heat of the soldering loop. It is a compact device, in accordance with the regulations valid during its manufacture and approved for operation by the national verification center. The transformer with nickel terminals of the secondary is deposited in the plastic case. The soldering loop is fixed on their ends with the help of M3 screws. Operation is controlled using the microswitch button. In the case, under the terminals of the secondary, is the LED diode. The connection to the electrical voltage network is made with the help of a flexible cable of 1.8 m. The use: Before putting into operation, the handle must be adjusted in the right working position. During this action, the soldering gun must be disconnected from the electrical network. After adjusting the loop and inserting it into the socket (with the established voltage of 230 V and appropriate protection), the device is ready for use. By pressing the button of the soldering gun, it is put into operation. At the same time, the LED diode lights up as an indicator of operation and which at the same time illuminates the glued area. The sticking time - button contact is 10 seconds, the rest period until the next start is 30 seconds. This cycle must be respected in order not to overload the transformer. Before the first gluing, it is recommended to dip the hot handle in rosin. When using the tubular tin (max. &ampOslash &ampplusmn3 mm) dipping is not necessary, being filled with rosin.

Spare parts:

Soldering loops can be purchased in stores with electrical installation materials.

Warning:

Use the soldering gun only at the voltage mentioned on the label and in the instructions. Before the first start-up, check the condition of the power cable, so that it is not damaged. This check must be repeated before every other use, or in case of suspicion of damage due to incorrect handling. Use the device only where there is no risk of damage to the soldered components from the heat of the soldering iron. For all actions - replacing the handle, checking the power cable, etc. the soldering gun must be without voltage, the plug removed from the socket.

Liquidation:

Liquidate the product according to the valid regulations and orders, i.e. hand over the packaging and electrical devices to the places designated for this purpose. All repairs and interventions on the electrical components of the soldering gun can only be carried out by the specialized workshop with appropriate qualifications, or by the manufacturer. This appliance can be used by children aged 8 years and older and the elderly or with reduced physical, mental and sensory capabilities or with insufficient experience and knowledge, only if they are supervised or have been instructed in the safe use of the appliance. the consumer and understand possible dangers. It is forbidden for children to play with this consumer. Cleaning and maintenance by the user cannot be performed by children without supervision.

Livrare rapidă

Soldering gun for tin, fludor, power ...

127.95 lei

Soldering gun for tin, fludor, power 100W
- it is powered at 230V AC
- the set also contains 5 spare tips
Packaging: blister 1 pc

Destination:

The transformer soldering gun is designed for soldering small components. It is especially recommended for soldering connections in electrotechnics, where the soldered components will not be damaged by the resistance heat of the soldering loop. It is a compact device, in accordance with the regulations valid during its manufacture and approved for operation by the national verification center. The transformer with nickel terminals of the secondary is deposited in the plastic case. The soldering loop is fixed on their ends with the help of M3 screws. Operation is controlled using the microswitch button. In the case, under the terminals of the secondary, is the LED diode. The connection to the electrical voltage network is made with the help of a flexible cable of 1.8 m. The use: Before putting into operation, the handle must be adjusted in the right working position. During this action, the soldering gun must be disconnected from the electrical network. After adjusting the loop and inserting it into the socket (with the established voltage of 230 V and appropriate protection), the device is ready for use. By pressing the button of the soldering gun, it is put into operation. At the same time, the LED diode lights up as an indicator of operation and which at the same time illuminates the glued area. The sticking time - button contact is 10 seconds, the rest period until the next start is 30 seconds. This cycle must be respected in order not to overload the transformer. Before the first gluing, it is recommended to dip the hot handle in rosin. When using the tubular tin (max. &ampOslash &ampplusmn3 mm) dipping is not necessary, being filled with rosin.

Spare parts:

Soldering loops can be purchased in stores with electrical installation materials.

Warning:

Use the soldering gun only at the voltage mentioned on the label and in the instructions. Before the first start-up, check the condition of the power cable, so that it is not damaged. This check must be repeated before every other use, or in case of suspicion of damage due to incorrect handling. Use the device only where there is no risk of damage to the soldered components from the heat of the soldering iron. For all actions - replacing the handle, checking the power cable, etc. the soldering gun must be without voltage, the plug removed from the socket.

Liquidation:

Liquidate the product according to the valid regulations and orders, i.e. hand over the packaging and electrical devices to the places designated for this purpose. All repairs and interventions on the electrical components of the soldering gun can only be carried out by the specialized workshop with appropriate qualifications, or by the manufacturer. This appliance can be used by children aged 8 years and older and the elderly or with reduced physical, mental and sensory capabilities or with insufficient experience and knowledge, only if they are supervised or have been instructed in the safe use of the appliance. the consumer and understand possible dangers. It is forbidden for children to play with this consumer. Cleaning and maintenance by the user cannot be performed by children without supervision.

Livrare rapidă

Soldering gun for tin, fludor, power ...

136.71 lei

Soldering gun for tin, fludor, power 125W
- it is powered at 230V AC
- the set also contains 5 spare tips
Packaging: blister 1 pc

Destination:

The transformer soldering gun is designed for soldering small components. It is especially recommended for soldering connections in electrotechnics, where the soldered components will not be damaged by the resistance heat of the soldering loop. It is a compact device, in accordance with the regulations valid during its manufacture and approved for operation by the national verification center. The transformer with nickel terminals of the secondary is deposited in the plastic case. The soldering loop is fixed on their ends with the help of M3 screws. Operation is controlled using the microswitch button. In the case, under the terminals of the secondary, is the LED diode. The connection to the electrical voltage network is made with the help of a flexible cable of 1.8 m. The use: Before putting into operation, the handle must be adjusted in the right working position. During this action, the soldering gun must be disconnected from the electrical network. After adjusting the loop and inserting it into the socket (with the established voltage of 230 V and appropriate protection), the device is ready for use. By pressing the button of the soldering gun, it is put into operation. At the same time, the LED diode lights up as an indicator of operation and which at the same time illuminates the glued area. The sticking time - button contact is 10 seconds, the rest period until the next start is 30 seconds. This cycle must be respected in order not to overload the transformer. Before the first gluing, it is recommended to dip the hot handle in rosin. When using the tubular tin (max. &ampOslash &ampplusmn3 mm) dipping is not necessary, being filled with rosin.

Spare parts:

Soldering loops can be purchased in stores with electrical installation materials.

Warning:

Use the soldering gun only at the voltage mentioned on the label and in the instructions. Before the first start-up, check the condition of the power cable, so that it is not damaged. This check must be repeated before every other use, or in case of suspicion of damage due to incorrect handling. Use the device only where there is no risk of damage to the soldered components from the heat of the soldering iron. For all actions - replacing the handle, checking the power cable, etc. the soldering gun must be without voltage, the plug removed from the socket.

Liquidation:

Liquidate the product according to the valid regulations and orders, i.e. hand over the packaging and electrical devices to the places designated for this purpose. All repairs and interventions on the electrical components of the soldering gun can only be carried out by the specialized workshop with appropriate qualifications, or by the manufacturer. This appliance can be used by children aged 8 years and older and the elderly or with reduced physical, mental and sensory capabilities or with insufficient experience and knowledge, only if they are supervised or have been instructed in the safe use of the appliance. the consumer and understand possible dangers. It is forbidden for children to play with this consumer. Cleaning and maintenance by the user cannot be performed by children without supervision.

Livrare rapidă

Soldering gun for tin, fludor, power ...

140.68 lei

Soldering gun for tin, fludor, power 100W
- it is powered at 230V AC
- the set also contains 5 spare tips
Packaging: blister 1 pc

Destination:

The transformer soldering gun is designed for soldering small components. It is especially recommended for soldering connections in electrotechnics, where the soldered components will not be damaged by the resistance heat of the soldering loop. It is a compact device, in accordance with the regulations valid during its manufacture and approved for operation by the national verification center. The transformer with nickel terminals of the secondary is deposited in the plastic case. The soldering loop is fixed on their ends with the help of M3 screws. Operation is controlled using the microswitch button. In the case, under the terminals of the secondary, is the LED diode. The connection to the electrical voltage network is made with the help of a flexible cable of 1.8 m. The use: Before putting into operation, the handle must be adjusted in the right working position. During this action, the soldering gun must be disconnected from the electrical network. After adjusting the loop and inserting it into the socket (with the established voltage of 230 V and appropriate protection), the device is ready for use. By pressing the button of the soldering gun, it is put into operation. At the same time, the LED diode lights up as an indicator of operation and which at the same time illuminates the glued area. The sticking time - button contact is 10 seconds, the rest period until the next start is 30 seconds. This cycle must be respected in order not to overload the transformer. Before the first gluing, it is recommended to dip the hot handle in rosin. When using the tubular tin (max. &ampOslash &ampplusmn3 mm) dipping is not necessary, being filled with rosin.

Spare parts:

Soldering loops can be purchased in stores with electrical installation materials.

Warning:

Use the soldering gun only at the voltage mentioned on the label and in the instructions. Before the first start-up, check the condition of the power cable, so that it is not damaged. This check must be repeated before every other use, or in case of suspicion of damage due to incorrect handling. Use the device only where there is no risk of damage to the soldered components from the heat of the soldering iron. For all actions - replacing the handle, checking the power cable, etc. the soldering gun must be without voltage, the plug removed from the socket.

Liquidation:

Liquidate the product according to the valid regulations and orders, i.e. hand over the packaging and electrical devices to the places designated for this purpose. All repairs and interventions on the electrical components of the soldering gun can only be carried out by the specialized workshop with appropriate qualifications, or by the manufacturer. This appliance can be used by children aged 8 years and older and the elderly or with reduced physical, mental and sensory capabilities or with insufficient experience and knowledge, only if they are supervised or have been instructed in the safe use of the appliance. the consumer and understand possible dangers. It is forbidden for children to play with this consumer. Cleaning and maintenance by the user cannot be performed by children without supervision.

Livrare rapidă

Soldering gun for tin, fludor, power ...

143.56 lei

Soldering gun for tin, fludor, power 125W
- it is powered at 230V AC
- the set also contains 5 spare tips
Packaging: blister 1 pc

Destination:

The transformer soldering gun is designed for soldering small components. It is especially recommended for soldering connections in electrotechnics, where the soldered components will not be damaged by the resistance heat of the soldering loop. It is a compact device, in accordance with the regulations valid during its manufacture and approved for operation by the national verification center. The transformer with nickel terminals of the secondary is deposited in the plastic case. The soldering loop is fixed on their ends with the help of M3 screws. Operation is controlled using the microswitch button. In the case, under the terminals of the secondary, is the LED diode. The connection to the electrical voltage network is made with the help of a flexible cable of 1.8 m. The use: Before putting into operation, the handle must be adjusted in the right working position. During this action, the soldering gun must be disconnected from the electrical network. After adjusting the loop and inserting it into the socket (with the established voltage of 230 V and appropriate protection), the device is ready for use. By pressing the button of the soldering gun, it is put into operation. At the same time, the LED diode lights up as an indicator of operation and which at the same time illuminates the glued area. The sticking time - button contact is 10 seconds, the rest period until the next start is 30 seconds. This cycle must be respected in order not to overload the transformer. Before the first gluing, it is recommended to dip the hot handle in rosin. When using the tubular tin (max. &ampOslash &ampplusmn3 mm) dipping is not necessary, being filled with rosin.

Spare parts:

Soldering loops can be purchased in stores with electrical installation materials.

Warning:

Use the soldering gun only at the voltage mentioned on the label and in the instructions. Before the first start-up, check the condition of the power cable, so that it is not damaged. This check must be repeated before every other use, or in case of suspicion of damage due to incorrect handling. Use the device only where there is no risk of damage to the soldered components from the heat of the soldering iron. For all actions - replacing the handle, checking the power cable, etc. the soldering gun must be without voltage, the plug removed from the socket.

Liquidation:

Liquidate the product according to the valid regulations and orders, i.e. hand over the packaging and electrical devices to the places designated for this purpose. All repairs and interventions on the electrical components of the soldering gun can only be carried out by the specialized workshop with appropriate qualifications, or by the manufacturer. This appliance can be used by children aged 8 years and older and the elderly or with reduced physical, mental and sensory capabilities or with insufficient experience and knowledge, only if they are supervised or have been instructed in the safe use of the appliance. the consumer and understand possible dangers. It is forbidden for children to play with this consumer. Cleaning and maintenance by the user cannot be performed by children without supervision.

Livrare rapidă

Soldering gun for tin, fludor, power ...

147.52 lei

Charger Li-Ion/Ni-MH/Ni-Cd/LiFePO4

Power Input:
- PD2.0(12V 1.67A) Recommend
- QC3.0(9V 2A)/5V 2A

3.6V/3.7V Li-Ion:

10440/14500/14650/16340/17335/17500/17670/18350/18490/18500/18650/18700/20700/21700/22650/25500/26650/32650
Constant Charging Current: 3Ax1 / 2Ax2 / 1Ax4 / 0.5Ax4 / 0.25Ax4
Charging Cutoff Voltage:4.20&ampplusmn0.05V
Charging Cutoff Current: &ample150mA

1.5V Li-ion AAA/AA

Constant Charging Current: 0.5Ax4
Charging Cutoff Voltage: N/A
Charging Cutoff Current: &ample150mA

1.2V Ni-MH AAA/AA/A/SC/C/D

Constant Charging Current: 0.5Ax4
Charging Cutoff Voltage: 1.45&ampplusmn0.1V
Charging Cutoff Current: &ample150mA

3.2V LiFePO4:

10440/14500/14650/16340/17335/17500/17670/18350/18490/18500/18650 /18700/20700/21700/22650/25500/26650/32650
Constant Charging Current: 3Ax1 / 2Ax2 / 1Ax4 / 0.5Ax4 / 0.25Ax4
Charging Cutoff Voltage: 3.65&ampplusmn0.05V
Charging Cutoff Current: &ample150mA

Safety Features:
Intelligent detection, Reverse polarity protection, Over-Current protection, Over-Voltage protection, Over-Charge protection, Short-Circuit protection, Auto-Stop after full charge, Soft start

Product Advantage

&ampbull The first capacity tester for rechargeable 1.5V Li-ion batteries.
&ampbull Compatible with 3.6/3.7V Li-ion, 1.5V Li-ion, 1.2V Ni-MH and 3.2V LiFePO4 batteries.
&ampbull High precision capacity test to distinguish overrated batteries.
&ampbull Smart battery recognition prevents mis-charging.
&ampbull Intelligent optimal charging strategy matching.
&ampbull Manual current selection function to meet different needs.
&ampbull Higher recovery success rate for over-discharged batteries.
&ampbull LCD screen displays real-time charging status.
&ampbull Built-in multiple protections for charging safety.

Tips:

1) Please use only compatible batteries to avoid damaging both the battery and the charger.
2) For the best charging experience, it is recommended to use an adaptor with the 12V 1.67A PD protocol. If the
input power is insufficient, the charger will adjust charging current correspondingly.
3) Please choose the correct charging mode based on the battery type.
4) When the LCD screen displays &ampquotErr&ampquot, please promptly remove the battery.
5) It is recommended to remove the battery after it is fully charged.

Packaging: box 1 pc.

Livrare rapidă

Charger Li-Ion/Ni-MH/Ni-Cd/LiFePO4 P...

148.48 lei

10GBASE-SR SFP+ LC TRANSCEIVER/SPEC: 850NM MULTI-MODE

10GBASE-SR SFP+ LC TRANSCEIVER/SPEC: 850NM MULTI-MODE

10GBASE-SR SFP+ LC TRANSCEIVER/SPEC: 850NM MULTI-MODE

10GBASE-SR SFP+ LC TRANSCEIVER/SPEC: 850NM MULTI-MODE

TP-Link Omada 10GBase-SR SFP+ LC Transceiver;SFP transceiver type: Fiber optic
Maximum data transfer rate: 10000 Mbit/s
Interface type: SFP+;Product colour: Silver
Certification: FCC
CE;Input voltage: 3.3 V;Width: 61.3 mm
Depth: 14.5 mm
Height: 12.2 mm;Number of products included: 1 pc(s)

Vezi toate produsele TP-LINK

	0368 803 539 comenzi@ury.ro
	Transport gratuit la comenzi peste 199 lei
	Retur gratuit în 14 zile
	Plata cu cardul
	Achizitii publice prin SICAP/SEAP
	Profesionalism Promptitudine


Transport gratuit la comenzi peste 199 lei	Retur gratuit în 14 zile	Plata cu cardul	Achizitii publice prin SICAP/SEAP	Profesionalism, Promptitudine

Branduri de top din categoria Accesorii Retelistica:

Descriere

	Technical details
Vendor	TP-LINK
	Performance
Maximum data transfer rate	10000 Mbit/s
Digital Diagnostics Monitoring (DDM)	Y
Wavelength	850 nm
Multi-mode fiber (MMF) supported	Y
Fiber optic connector	LC (UPC)
Maximum transfer distance	300 m
Fiber cable diameters supported (core (cladding))	50/125.62.5/125 µm
SFP transceiver type	Fiber optic
Interface type	SFP+
	Features
Product colour	Silver
Certification	FCC, CE
Hot-swap	Y
	Power
Input voltage	3.3 V
	Operational conditions
Operating temperature (T-T)	0 - 70 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 90 %
Storage temperature (T-T)	-40 - 80 °C

mai mult

Specificații produs

10GBASE-SR SFP+ LC TRANSCEIVER/SPEC: 850NM MULTI-MODE

Referintă: 284858
SKU: SM5110-SR
Compară:

126³⁴
TVA inclus

În stoc (14buc)

Livrare până în 10 decembrie

Pret NET:

104,41 RON [20,51 €]

Formuleaza-mi mai clar un titlu, o scurta prezentare pe intelesul tuturor si o descriere, toate in format html, sa fie cat mai detaliate; De pe site-ul producatorului, sa nu fie nimic gresit! Uite datele despre produs pe care le am : <div class="ury-product-head"><h1 class="ury-h1">10GBASE-SR SFP+ LC TRANSCEIVER/SPEC: 850NM MULTI-MODE</h1><p class="ury-p"><span style="color:#aaaaaa">Referință: </span><strong class="copy">284858</strong><br><span style="color:#aaaaaa">SKU: </span><strong class="copy">SM5110-SR</strong><span style="color:#aaaaaa">Nume_produs: </span><strong class="copy">10GBASE-SR SFP+ LC TRANSCEIVER/SPEC: 850NM MULTI-MODE</strong><span style="color:#aaaaaa">Descriere_scurta: </span><strong class="copy">TP-Link Omada 10GBase-SR SFP+ LC Transceiver. SFP transceiver type: Fiber optic, Maximum data transfer rate: 10000 Mbit/s, Interface type: SFP+. Product colour: Silver, Certification: FCC, CE. Input voltage: 3.3 V. Width: 61.3 mm, Depth: 14.5 mm, Height: 12.2 mm. Number of products included: 1 pc(s)</strong></p><p class="ury-p"><a target="_blank" href="https://www.ury.ro/_p284858/">Vezi produsul</a></p></div> iti dau o descriere html ca model cum doresc <div class="ury-scope"> <div class="ury-product"> <h1 class="ury-h1">Windows 11 Professional 64-Bit English Intl – 1 Pack DSP OEI DVD (Canal oficial Microsoft)</h1> <p class="ury-p"><span class="ury-label">SKU:</span> <span class="ury-sku">FQC-10528</span> \| <span class="ury-label">Referință:</span> <span class="ury-reference">197094</span></p> <h2 class="ury-h2">Descriere produs</h2> <p class="ury-p">Distribuție oficială Microsoft a sistemului de operare <strong>Windows 11 Professional 64-Bit în limba engleză (International)</strong>, livrat pe un singur DVD. Produsul include pachetul de semnătură digitală (DSP) și licența OEM Eng Intl (OEI), garantând autenticitatea și suportul tehnic prin canalul oficial Microsoft.</p> <h2 class="ury-h2">Caracteristici principale</h2> <ul class="ury-ul"> <li class="ury-li">Educație: Windows 11 Professional (Pro) – funcționalități business precum BitLocker, Group Policy, Remote Desktop și Hyper-V.</li> <li class="ury-li">Arhitectură: 64-Bit – compatibil cu procesoare moderne și memorie RAM de 4 GB+.</li> <li class="ury-li">Limbă: Engleză (International) – localizare pentru piețele globale.</li> <li class="ury-li">Licență: OEM Eng Intl – cheie de activare dedicată primei instalări pe un PC nou.</li> <li class="ury-li">Distribuție: Canal oficial Microsoft – autenticitate și suport garantat.</li> <li class="ury-li">Medie: DVD (1 Pack) – include video de instalare și documentație.</li> <li class="ury-li">DSP: Digital Signature Pack – verifică integritatea fișierelor de instalare.</li> </ul> tot continutul sa fie inclus in HTML Mai multe informații, te rog
Cere detalii
Solicită publicarea în catalogul electronic SICAP Te notificam imediat ce articolul va fi publicat!
Comercializat din	10/05/2024
Ridică din Alege Easybox
Cost transport 19.00 lei
Toate prețurile includ TVA

AP-220-MNT-W1 Basic Mount Kit

În stoc (1buc)

Livrare până în 16 decembrie

121¹⁸ lei 23.80€

Ubiquiti UACC-OM-MM-10G-D module de emisie-recepție pentru rețele Fibră optică 10000 Mbit/s SFP+

Stoc suficient

Livrare până în 16 decembrie

122⁹⁷ lei 24.15€

CABLE W/ RJ10 TO 2.5MM/F/ GN9120 GN ELLIPSE GN8000

În stoc (7buc)

Livrare până în 16 decembrie

121⁸⁵ lei 23.93€

GRS MODULE 10KM F-SM1310-10KM-10G

Stoc suficient

Livrare până în 8 decembrie

121¹³ lei 23.79€

Modul ATI 1000SX (LC) multi-mode SFP, Ext-Temp, 550m

În stoc (18buc)

Livrare până în 8 decembrie

PRP:122⁶¹ lei 111⁹⁴ lei 21.98€

Papuc cupru ST stanat 16/6 - ELEMATIC

În stoc (7buc)

Livrare până în 10 decembrie

122⁹¹ lei 24.14€

Papuc cupru ST stanat 35/6 - ELEMATIC

Stoc suficient

Livrare până în 10 decembrie

122⁹¹ lei 24.14€

Cablu VGA 15m, dublu ecranat CA-VGAC-10CC-0150-B, Lanberg

În stoc (19buc)

Livrare până în 12 decembrie

122⁹⁵ lei 24.15€

SOLDER GUN PLB75W

Stoc suficient

Livrare până în 8 decembrie

PRP:123¹⁵ lei 112⁴⁴ lei 22.08€

Ubiquiti SFP UACC-OM-MM-1G-D-2 Multi-Mode Fiber LC (2er-Pack) UF-MM-1G: SFP, 1 Gbps

Stoc suficient

Livrare până în 8 decembrie

124⁹⁴ lei 24.54€

Cap terminal FTP CAT.6A pentru cleste sertizat 31.0011 - Molex

În stoc (5buc)

Livrare până în 10 decembrie

124⁹⁸ lei 24.54€

Modul optic SFP+ 10GBASE WDM, 1330nm/1270nm (Rx/Tx) SM, 20km, LC DDM, Type B, (compatibil CISCO) - NEXIO

Stoc suficient

Livrare până în 10 decembrie

124¹⁵ lei 24.38€

Modul optic SFP+ 10GBASE WDM, 1270nm/1330nm (Rx/Tx) SM, 20km, LC DDM, Type A, (compatibil CISCO) - NEXIO

Stoc suficient

Livrare până în 10 decembrie

124¹⁵ lei 24.38€

PSUP-AC-19-19,5/45W-BL

În stoc (3buc)

Livrare până în 8 decembrie

PRP:125²⁴ lei 114³⁵ lei 22.46€

Ubiquiti Networks UACC-CABLE-PATCH-OUTDOOR-8M-W networking cable White Cat5e S/UTP (STP)

În stoc (5buc)

Livrare până în 13 decembrie

124⁷⁶ lei 24.50€

ELPMB63 - Finger Touch Wall Bracket for ELPFT01

În stoc (7buc)

Livrare până în 8 decembrie

PRP:125⁸⁴ lei 114⁹⁰ lei 22.56€

Papuc cupru ST stanat 35/8 - ELEMATIC

În stoc (6buc)

Livrare până în 10 decembrie

126⁴⁶ lei 24.84€

Akyga AK-ND-47 power adapter/inverter Indoor 40 W Black

În stoc (3buc)

Livrare până în 12 decembrie

126⁷⁸ lei 24.90€

Lanberg PLS-5000EZ wire connector RJ-45 Grey

Stoc suficient

Livrare până în 12 decembrie

127⁴⁸ lei 25.04€

PLANET MGB-LX module de emisie-recepție pentru rețele Fibră optică 1000 Mbit/s SFP 1310 nm

În stoc (14buc)

Livrare până în 16 decembrie

127⁶⁰ lei 25.06€

Lanberg NC-1000-01 cable gender changer USB-A RJ-45 Black

Stoc suficient

Livrare până în 12 decembrie

128¹⁸ lei 25.17€

Lenovo 4X90U90619 cabluri USB 1 m USB C Negru

Stoc suficient

Livrare până în 16 decembrie

112²⁷ lei 22.05€

Cudy SM10GMA-03

În stoc (5buc)

Livrare până în 13 decembrie

128⁵² lei 25.24€

Papuc cupru ST stanat 10/10 (100buc) - ELEMATIC

În stoc (5buc)

Livrare până în 10 decembrie

128⁵³ lei 25.24€

Patchcord FO E2000/APC-E2000/APC, SM OS2 9/125, manta LSZH 3.0mm, duplex 10m, E2000/APC-E2000/APC-SM/DX-10 (timbru verde 0.08 lei)

Stoc suficient

Livrare până în 10 decembrie

127⁸⁸ lei 25.11€

MIKROTIK S-RJ01 SFP Module 1.25Gb/s RJ45 100m

În stoc (1buc)

Livrare până în 8 decembrie

128²⁹ lei 25.19€

Jennifer's Extralink | Fiber Optic Junction Box | 16 welds black with connector

Stoc suficient

Livrare până în 19 decembrie

129⁵⁵ lei 25.44€

Papuc cupru ST stanat 16/8 - ELEMATIC

În stoc (5buc)

Livrare până în 10 decembrie

130⁰⁸ lei 25.55€

SOLDER GUN 75W-NB

Stoc suficient

Livrare până în 8 decembrie

PRP:130¹¹ lei 118⁷⁹ lei 23.33€

Akyga AK-ND-50 power adapter/inverter Indoor 45 W Black

Stoc suficient

Livrare până în 12 decembrie

130³³ lei 25.60€

AP-220-MNT-W1W MT BASIC WHITE KIT

Stoc suficient

Livrare până în 16 decembrie

130⁴⁸ lei 25.62€

PERFORM 75 CUSHION OTH/LEATHERETTE 1 PC.

În stoc (2buc)

Livrare până în 13 decembrie

132²⁸ lei 25.98€

Excelent

79 zile,21 ore si 48 minute

Am achiziționat de la URY STORE un Server DELL PowerEdge T160 cu o configurație de top: procesor Intel Xeon E-2488, 2 x SSD Samsung de 1TB, placă video RTX A400 LP 4GB cu 4 x mini DisplayPort, într-un format Smallbox ideal pentru spații restrânse. Performanța este remarcabilă — serverul rulează fără probleme sarcini complexe, fiind perfect pentru medii de virtualizare, dezvoltare software și aplicații grafice. Livrarea a fost rapidă și fără incidente, iar produsul a fost ambalat cu grijă, ajungând în stare impecabilă. Ce m-a impresionat cu adevărat a fost nivelul de suport oferit de echipa URY STORE: comunicare clară, promptitudine și disponibilitate pentru orice întrebare tehnică. Este evident că URY STORE pune accent pe calitate, atât în ceea ce privește produsele, cât și serviciile. Într-un domeniu în care fiabilitatea și suportul tehnic sunt esențiale, URY STORE reușește să ofere o experiență completă și de încredere. Recomand cu toată încrederea acest magazin tuturor celor care caută echipamente IT performante și servicii profesionale. Cu siguranță voi reveni pentru viitoare achiziții!

Stefan-Mihai Moga
108 zile,3 ore si 57 minute

Foarte multumit de interactiunea cu magazinul. Dl Cristian a fost extrem de amabil si maleabil. Tot procesul de achizitie echipamente a mers snur. Recomand!

Radu Adrian
192 zile,17 ore si 36 minute

Ury store,un magazin foarte bun,orice problema intampinati,...,domnul administrator rezolvă Achizitionasem un laptop Asus Vivobook.Acumulatorul era mort.De nou.Am contactat firma prin dna Stela Janko si,imediat,au trimis Cargus curier ,au preluat laptopul si in cateva zile mi l au adus cu alt acumulator instalat in service ul dlor.Nu m a costat nimic.Apoi,deoarece acest laptop nu are nimic pe el si se instaleaza mai greu windows si office ul microsoft ,am tot scris pe wh si am sunat la dl administrator.Explcandu i situaitia mea,ca am luat acest laptop din banii de prima de cariera didactica si ca nu am laptop si nu stiu sa instalez sistem dr operare pe el,a trimis Sameday ,l au preluat si,in cateva zile,mi l au trimis inapoi cu toate instalate...si nici un ban nu mi au cerut ..au platit si curier fan courier inapoi...Deci,oamenii,dl administrator indeosebi,sunt Oameni si chiar daca s a strecurat o mica greseala de acumulator initial,au indreptat o cu varf si indesat,indatorându mă...lucru pentru care ,le MULTUMESC frumos si ii felicit.Va doresc spor si succes,Ury Store! Viata indelungata cu sanatate!

NARCISA IONESCU
194 zile,2 ore si 2 minute

Am achiziționat un Invertor volt polska sinus pro ultra hv6000 Comunicare super, livrare super, momentan aparatul funcționează cum trebuie. Bravo !

Doru Ionescu
208 zile,o ora59 minute

Mi s a dat un laptop refurbished cu acumulator mort ,desi am platit la pret de nou ...mi s a preluat cu Cargus si inlocuit acumulatorul.Solicit sa schimb acest laptop cu alt model,sper nou ..1700 lei si mi se inchide brutal telefonul de catre angajatul lor de whatsapp...care nu discuta prin mesaje,doar cu apel...e GROAZNIC! NU CUMPARATI DE LA EI

NARCISA IONESCU
211 zile,3 ore si 4 minute

Am achiziționat recent un laptop de gaming de la Ury Store și sunt extrem de mulțumit atât de produs, cât și de serviciile oferite. Personalul a fost foarte amabil și bine informat, răspunzând cu răbdare la toate întrebările mele și oferindu-mi recomandări utile în funcție de nevoile mele. Laptopul a fost livrat rapid, ambalat impecabil, iar produsul corespunde în totalitate descrierii de pe site. Funcționează perfect, performanțele sunt excelente și se vede că este un produs de calitate. Apreciez în mod deosebit comunicarea promptă și profesionalismul echipei. Este clar că pun accent pe satisfacția clientului. Cu siguranță voi reveni pentru viitoare achiziții și recomand acest magazin tuturor celor care caută echipamente IT de încredere!

Eduard Serdaru
232 zile,23 ore si 30 minute

Am avut o experiență foarte plăcută cu această firmă! Am comandat o imprimantă și am fost impresionat de promptitudinea livrării — totul a decurs rapid și fără probleme. Personalul a fost foarte amabil și profesionist, oferindu-mi toate informațiile de care aveam nevoie. Se vede că este o firmă serioasă, care pune accent pe calitatea serviciilor oferite. Recomand cu încredere!

Costel Lazar
276 zile,2 ore si 52 minute

Am cumparat un laptop HP, multumita de produs si de interactiunea cu cei de la URY STORE. Oameni seriosi, saritori, m-au ajutat cu tot ce am avut nevoie!

Gabriela Chicu
276 zile,21 ore si 49 minute

Márk Szőke
276 zile,23 ore si 14 minute

Servicii profesioniste, echipamente de calitate. Recomand!

CODRUT CHERESTES
276 zile,23 ore si 32 minute

adrian stefanescu
411 zile,16 ore si 28 minute

Recomand cu incredere URY STORE. Servicii impecabile, comunicare foarte buna, produse livrate la timp. Mult succes cu business-ul!

YNWA7
442 zile,3 ore si 7 minute

Movileanu Alin
463 zile,20 ore si 31 minute

Am fost placut surprins de interactiunea cu personalul magazinului. Comanda s-a derulat normal, produsul ajuns cu bine. Marele atu este ca au produse care nu sunt aduse de alte magazine din tara noastra.

Gheorghe Muraru
465 zile,21 ore si 5 minute

Duotonina
483 zile,21 ore si 35 minute

Servicii de nota 10. Am achiziționat un o imprimanta multifuncțională și sunt foarte mulțumită atat de produs, cât și amabilitatea și promptitudinea personalului.

nicoleta Bimokono
484 zile,13 ore si 16 minute

Marsel Bega
485 zile,2 ore si 26 minute

Iulian Pana
500 zile,2 ore si 58 minute

Cooperare excelenta!

Hobby King
508 zile,40 minute

Foarte prompți și serviabili ! Laptopul încă nu l-am primit, dar serviciile au fost ireproșabile.

Ioan Neamtu